Capabilities
Melting, casting, rolling, extrusion, finishing and packing — 50,000 tonnes a year from one site in Luoyang.
Equipment
The lines that decide what we can hold, roll and finish.
| Line | Specification | Qty |
|---|---|---|
| Melting and casting | 2 lines, 12 t furnaces, DC casting | 2 |
| Hot rolling | 1,450 mm reversing mill | 1 |
| Cold rolling | 1,650 mm 4-high, 0.2–6 mm | 2 |
| Extrusion presses | 600–3,600 t | 6 |
| Anodising | 10–25 µm, 6 m tanks | 2 |
| Cut-to-length and slitting | 0.2–6 mm, 100–2,650 mm | 3 |
From ingot to container
Six controlled stages, each recorded against the batch.
Melting and casting
Spectro-checked chemistry, in-line degassing and grain refinement before the ingot is cast.
Hot and cold rolling
Breakdown on the reversing mill, then cold rolling with thickness and flatness monitored on-line.
Heat treatment
Annealing, solution treatment and ageing logged by furnace load and batch.
Cutting and slitting
Cut-to-length, slitting and sawing to drawing, with first-piece dimensional approval.
Inspection
Dimension, surface, mechanical properties and chemistry checked against the mill certificate.
Packing
Moisture barrier, corner protection and steel banding, photographed per pallet.