3003 H14 Aluminium Plate, Tube, Coil, Foil, Profile — GB/T 3880 · ASTM B209
3003 is the workhorse aluminium-manganese alloy: about 20% stronger than 1100, still highly formable, and corrosion resistant enough for roofing, containers and chemical equipment. It welds and brazes well, which makes it the usual choice where a fabricated assembly has to be both light and durable. We supply plate, coil, strip, bar and tube in O, H14, H24 and H112.
Aluminium plate & sheetAluminium tube & pipeAluminium coilAluminium foilAluminium profile
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 3003 |
|---|---|
| Series | 3xxx |
| Temper | H14 |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 6892 |
| Thickness | 0.2 – 150 mm |
| Width | up to 2,650 mm |
| Length | up to 12,000 mm |
| Surface | Mill finish · PVC coated · Anodised |
| Density | 2.73 g/cm³ |
| Melting range | 643 – 654 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Mn | 1.0 – 1.5 |
| Cu | 0.05 – 0.20 |
| Si | 0.60 max |
| Fe | 0.70 max |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 150 MPa |
| Yield strength Rp0.2 | 145 MPa |
| Elongation A | 8 % |
| Hardness | 40 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 3003 | 3004 | 8011 |
|---|---|---|---|
| Tensile strength Rm | 150 MPa | 215 MPa | 150 MPa |
| Yield strength Rp0.2 | 145 MPa | 170 MPa | 140 MPa |
| Elongation A | 8 % | 10 % | 4 % |
| Hardness | 40 HBW | 55 HBW | 50 HBW |
| Density | 2.73 g/cm³ | 2.72 g/cm³ | 2.71 g/cm³ |
Process and quality control
Manganese content is checked per heat because it drives the strength. Bend and tensile tests are run on the first coil of each batch, and tube is eddy-current tested on request.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.