6061 T6 Aluminium Plate, Bar, Tube, Profile — GB/T 3880 · ASTM B209
6061 is the general-purpose heat-treatable alloy: magnesium and silicon give 290–310 MPa tensile in T6, with good machinability, weldability and corrosion resistance. It machines cleanly, takes anodising well and is available in more sizes than any other grade, which makes it the default for jigs, fixtures, machined parts and structural frames. Supplied in plate to 500 mm, plus bar, tube and extrusion.
Aluminium plate & sheetAluminium bar & rodAluminium tube & pipeAluminium profile
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 6061 |
|---|---|
| Series | 6xxx |
| Temper | T6 |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 6892 |
| Thickness | 0.2 – 150 mm |
| Width | up to 2,650 mm |
| Length | up to 12,000 mm |
| Surface | Mill finish · PVC coated · Anodised |
| Density | 2.70 g/cm³ |
| Melting range | 582 – 652 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Mg | 0.8 – 1.2 |
| Si | 0.40 – 0.80 |
| Cu | 0.15 – 0.40 |
| Cr | 0.04 – 0.35 |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 310 MPa |
| Yield strength Rp0.2 | 275 MPa |
| Elongation A | 12 % |
| Hardness | 95 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 6061 | 6082 | 6005A |
|---|---|---|---|
| Tensile strength Rm | 310 MPa | 310 MPa | 290 MPa |
| Yield strength Rp0.2 | 275 MPa | 260 MPa | 240 MPa |
| Elongation A | 12 % | 10 % | 10 % |
| Hardness | 95 HBW | 95 HBW | 90 HBW |
| Density | 2.70 g/cm³ | 2.70 g/cm³ | 2.70 g/cm³ |
Process and quality control
Solution treatment and ageing are logged per furnace load, with hardness checked on every batch and tensile tests per lot. Ultrasonic inspection of thick plate and AMS 4027 certification are available.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.