6082 T6 Aluminium Plate, Bar, Tube, Profile — GB/T 3880 · ASTM B209
6082 is the strongest of the standard 6xxx extrusion alloys: 310 MPa tensile and 260 MPa yield in T6, about 10% above 6061, with manganese controlling grain structure through the extrusion. It machines cleanly and takes structural welds, so bridge beams, automotive structural parts and forged ball studs are built from it. Plate, bar, tube and profile.
Aluminium plate & sheetAluminium bar & rodAluminium tube & pipeAluminium profile
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 6082 |
|---|---|
| Series | 6xxx |
| Temper | T6 |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 6892 |
| Thickness | 0.2 – 150 mm |
| Width | up to 2,650 mm |
| Length | up to 12,000 mm |
| Surface | Mill finish · PVC coated · Anodised |
| Density | 2.70 g/cm³ |
| Melting range | 555 – 650 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Mg | 0.60 – 1.20 |
| Si | 0.70 – 1.30 |
| Mn | 0.40 – 1.00 |
| Cr | 0.25 max |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 310 MPa |
| Yield strength Rp0.2 | 260 MPa |
| Elongation A | 10 % |
| Hardness | 95 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 6082 | 6061 | 5754 |
|---|---|---|---|
| Tensile strength Rm | 310 MPa | 310 MPa | 200 MPa |
| Yield strength Rp0.2 | 260 MPa | 275 MPa | 85 MPa |
| Elongation A | 10 % | 12 % | 26 % |
| Hardness | 95 HBW | 95 HBW | 50 HBW |
| Density | 2.70 g/cm³ | 2.70 g/cm³ | 2.66 g/cm³ |
Process and quality control
Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.