5083 H116 Aluminium Plate, Bar, Tube, Profile — GB/T 3880 · ASTM B209
5083 is the alloy specified for welded marine structures: 4.0–4.9% magnesium gives 275–350 MPa tensile and the best seawater resistance of any common grade. In H116 or H321 temper it resists intergranular attack after welding, which is why classification societies accept it for hulls, decks and tanks. We supply plate from 3 mm to 200 mm with ultrasonic inspection on request.
Aluminium plate & sheetAluminium bar & rodAluminium tube & pipeAluminium profile
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 5083 |
|---|---|
| Series | 5xxx |
| Temper | H116 · H321 |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 6892 |
| Thickness | 0.2 – 150 mm |
| Width | up to 2,650 mm |
| Length | up to 12,000 mm |
| Surface | Mill finish · PVC coated · Anodised |
| Density | 2.66 g/cm³ |
| Melting range | 574 – 638 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Mg | 4.0 – 4.9 |
| Mn | 0.40 – 1.00 |
| Cr | 0.05 – 0.25 |
| Fe | 0.40 max |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 305 MPa |
| Yield strength Rp0.2 | 215 MPa |
| Elongation A | 16 % |
| Hardness | 70 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 5083 | 5052 | 5A06 |
|---|---|---|---|
| Tensile strength Rm | 305 MPa | 230 MPa | 320 MPa |
| Yield strength Rp0.2 | 215 MPa | 195 MPa | 160 MPa |
| Elongation A | 16 % | 12 % | 20 % |
| Hardness | 70 HBW | 60 HBW | 70 HBW |
| Density | 2.66 g/cm³ | 2.68 g/cm³ | 2.64 g/cm³ |
5052 is cheaper, easier to form and sufficient for most sheet-metal parts; 5083 is the choice once the structure is welded and loaded, or class-approved.
Process and quality control
Every plate is ultrasonically inspected for internal defects on request, and H116 material is tested to ASTM G67 for intergranular corrosion. Tensile tests are taken transverse to the rolling direction.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.