ZORLANGALUMINUM

Standard

January 2026: CBAM stops being reporting and starts being a bill

From 1 January 2026, EU importers of aluminium must surrender CBAM certificates for embedded emissions. What the mechanism costs, how it is calculated, and where the EU is extending it next.

On 1 January 2026 the EU's Carbon Border Adjustment Mechanism entered its definitive period. Reporting, which had been running since October 2023, became a financial obligation: importers of aluminium into the EU must now surrender CBAM certificates covering the embedded emissions of the goods they bring in.

How the bill is calculated

Four inputs decide the number:

  1. Embedded direct emissions per tonne of product, based on the producing installation's actual data where available, default values otherwise.
  2. The applicable benchmark, set against the best-performing EU installations for that product. Emissions below the benchmark reduce the obligation; emissions above it increase it.
  3. The CBAM certificate price, linked to the EU emissions trading system allowance price.
  4. The free-allocation phase-out, which reduces the free allowances EU producers receive over the coming years, progressively raising the effective charge on imports.

For a typical Chinese primary-aluminium-based sheet, the direct emissions intensity sits well above the EU benchmark. Using default values rather than verified actual data adds a further penalty, because defaults are deliberately conservative.

The recycled-content arbitrage

The single most effective lever is secondary metal. Recycled aluminium carries a small fraction of the direct emissions of primary — typically around 5% or less. Where the applicable standard and the end use permit recycled content, the CBAM obligation falls close to zero even at full certificate prices.

That has created a real, defensible price difference in Europe: a low-carbon or high-recycled-content product can now command a premium that is funded by the avoided certificate cost, not by marketing.

What the EU is doing next

The Commission has proposed extending CBAM beyond raw materials to a long list of downstream steel- and aluminium-intensive products from 2028 — machinery, automotive parts, appliances and similar goods. If adopted, that would move the obligation from the mill to the finished-goods importer, and cascade the carbon question down the entire bill of materials.

What it means for buyers and suppliers

  • Ask for verified actual emissions now. Default values are the most expensive option available. A supplier who can provide installation-level electricity and fuel data, third-party verified, is worth a premium.
  • Treat carbon as a third price line. Metal, conversion, carbon. Quotes that fold carbon into "duty and taxes" hide the component most likely to change.
  • Specify recycled content where the standard allows. It is the cheapest route to compliance and increasingly the deciding factor in European tenders.
  • Keep the documentation chain intact. The importer, not the exporter, faces the legal obligation — but the importer will pass the data requirement straight back to you.

Where it points

CBAM turns carbon intensity into a trade cost, and it is the first mechanism that prices a Chinese mill's power supply into a European buyer's landed cost. For exporters, the practical consequence is that documentation has become a product feature. A coil with a verified emissions figure is now a different product from an identical coil without one.

See 3003 sheet and 6063 billet for product families where recycled input and documented power supply move the number most.

Data sources

  • Regulation (EU) 2023/956 and implementing acts, as amended
  • European Commission CBAM guidance for the aluminium sector, 2025–2026
  • European Commission proposal to extend CBAM to downstream products, 2026
  • International Aluminium Institute, aluminium sector emissions intensity data

Related

All news