4045 O Aluminium Bar, Coil — GB/T 3880 · ASTM B209
4045 is the brazing clad: 9–11% silicon melts near 577 °C, roughly 80 °C below the 3003 core it is rolled onto, so one furnace pass bonds an entire heat exchanger. We supply it as clad coil for brazing sheet and as bar or wire stock for filler metal.
Aluminium bar & rodAluminium coil
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 4045 |
|---|---|
| Series | 4xxx |
| Temper | O |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 6892 |
| Thickness | 0.2 – 4.0 mm |
| Width | up to 2,650 mm |
| Length | coil ID 508 mm · 2 – 8 t |
| Surface | Mill finish · Coated · Slit to width |
| Density | 2.70 g/cm³ |
| Melting range | 577 – 600 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Si | 9.0 – 11.0 |
| Fe | 0.80 max |
| Cu | 0.30 max |
| Mn | 0.05 max |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 120 MPa |
| Yield strength Rp0.2 | 55 MPa |
| Elongation A | 20 % |
| Hardness | 35 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 4045 | 4343 | 3003 |
|---|---|---|---|
| Tensile strength Rm | 120 MPa | 115 MPa | 150 MPa |
| Yield strength Rp0.2 | 55 MPa | 50 MPa | 145 MPa |
| Elongation A | 20 % | 20 % | 8 % |
| Hardness | 35 HBW | 33 HBW | 40 HBW |
| Density | 2.70 g/cm³ | 2.70 g/cm³ | 2.73 g/cm³ |
Process and quality control
Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.