5182 H19 Aluminium Plate, Coil — GB/T 3880 · ASTM B209
5182 is the lid and tab alloy: 4–5% magnesium hardened to H19 gives 400 MPa tensile and 365 MPa yield, so a 0.22 mm end holds the pressure of a carbonated can without bulging. It also appears as automotive inner panel where high formability at strength is needed.
Aluminium plate & sheetAluminium coil
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 5182 |
|---|---|
| Series | 5xxx |
| Temper | H19 |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 |
| Thickness | 0.2 – 4.0 mm |
| Width | up to 2,650 mm |
| Length | coil ID 508 mm · 2 – 8 t |
| Surface | Mill finish · Coated · Slit to width |
| Density | 2.65 g/cm³ |
| Melting range | 577 – 638 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Mg | 4.0 – 5.0 |
| Mn | 0.20 – 0.50 |
| Cu | 0.15 max |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 400 MPa |
| Yield strength Rp0.2 | 365 MPa |
| Elongation A | 4 % |
| Hardness | 105 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 5182 | 3104 | 3004 |
|---|---|---|---|
| Tensile strength Rm | 400 MPa | 285 MPa | 215 MPa |
| Yield strength Rp0.2 | 365 MPa | 260 MPa | 170 MPa |
| Elongation A | 4 % | 3 % | 10 % |
| Hardness | 105 HBW | 85 HBW | 55 HBW |
| Density | 2.65 g/cm³ | 2.72 g/cm³ | 2.72 g/cm³ |
Process and quality control
Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.