3104 H19 Aluminium Plate, Coil — GB/T 3880 · ASTM B209
3104 is drawn and ironed into two-piece beverage cans: 285 MPa tensile and 260 MPa yield in H19 give the wall enough strength to survive the DI process at 0.25 mm and thinner. Iron and copper are held in tight ranges so the ears stay short and the body thins evenly. Coil only, 0.2–4.0 mm, slit to your blank width.
Aluminium plate & sheetAluminium coil
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 3104 |
|---|---|
| Series | 3xxx |
| Temper | H19 |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 |
| Thickness | 0.2 – 4.0 mm |
| Width | up to 2,650 mm |
| Length | coil ID 508 mm · 2 – 8 t |
| Surface | Mill finish · Coated · Slit to width |
| Density | 2.72 g/cm³ |
| Melting range | 630 – 655 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Mn | 0.8 – 1.4 |
| Mg | 0.8 – 1.3 |
| Fe | 0.30 – 0.50 |
| Cu | 0.05 – 0.25 |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 285 MPa |
| Yield strength Rp0.2 | 260 MPa |
| Elongation A | 3 % |
| Hardness | 85 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 3104 | 5182 | 3004 |
|---|---|---|---|
| Tensile strength Rm | 285 MPa | 400 MPa | 215 MPa |
| Yield strength Rp0.2 | 260 MPa | 365 MPa | 170 MPa |
| Elongation A | 3 % | 4 % | 10 % |
| Hardness | 85 HBW | 105 HBW | 55 HBW |
| Density | 2.72 g/cm³ | 2.65 g/cm³ | 2.72 g/cm³ |
Process and quality control
Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.