5005 H14 Aluminium Plate, Tube, Coil, Profile — GB/T 3880 · ASTM B209
5005 matches 3003 in strength, 165 MPa in H14, but anodises to a brighter and whiter finish because magnesium is balanced against low iron and silicon. That is why architectural panels, instrument fascias and decorative trim specify it. Sheet, coil, tube and profile, anodised in-house.
Aluminium plate & sheetAluminium tube & pipeAluminium coilAluminium profile
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 5005 |
|---|---|
| Series | 5xxx |
| Temper | H14 |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 6892 |
| Thickness | 0.2 – 150 mm |
| Width | up to 2,650 mm |
| Length | up to 12,000 mm |
| Surface | Mill finish · PVC coated · Anodised |
| Density | 2.70 g/cm³ |
| Melting range | 632 – 655 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Mg | 0.50 – 1.10 |
| Cu | 0.20 max |
| Si | 0.30 max |
| Fe | 0.70 max |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 165 MPa |
| Yield strength Rp0.2 | 145 MPa |
| Elongation A | 8 % |
| Hardness | 45 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 5005 | 3003 | 5052 |
|---|---|---|---|
| Tensile strength Rm | 165 MPa | 150 MPa | 230 MPa |
| Yield strength Rp0.2 | 145 MPa | 145 MPa | 195 MPa |
| Elongation A | 8 % | 8 % | 12 % |
| Hardness | 45 HBW | 40 HBW | 60 HBW |
| Density | 2.70 g/cm³ | 2.73 g/cm³ | 2.68 g/cm³ |
Process and quality control
Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.