5A06 O Aluminium Plate, Bar, Tube, Profile — GB/T 3880 · ASTM B209
5A06 is the Chinese high-magnesium grade: 5.8–6.8% Mg gives 320 MPa tensile and 160 MPa yield in the annealed state, the highest magnesium content we roll and the best seawater resistance in the 5xxx family. It is welded into ship superstructures, pressure hulls and rail vehicle bodies.
Aluminium plate & sheetAluminium bar & rodAluminium tube & pipeAluminium profile
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 5A06 |
|---|---|
| Series | 5xxx |
| Temper | O |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 6892 |
| Thickness | 0.2 – 150 mm |
| Width | up to 2,650 mm |
| Length | up to 12,000 mm |
| Surface | Mill finish · PVC coated · Anodised |
| Density | 2.64 g/cm³ |
| Melting range | 570 – 640 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Mg | 5.8 – 6.8 |
| Mn | 0.50 – 0.80 |
| Si | 0.40 max |
| Fe | 0.40 max |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 320 MPa |
| Yield strength Rp0.2 | 160 MPa |
| Elongation A | 20 % |
| Hardness | 70 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 5A06 | 5083 | 5754 |
|---|---|---|---|
| Tensile strength Rm | 320 MPa | 305 MPa | 200 MPa |
| Yield strength Rp0.2 | 160 MPa | 215 MPa | 85 MPa |
| Elongation A | 20 % | 16 % | 26 % |
| Hardness | 70 HBW | 70 HBW | 50 HBW |
| Density | 2.64 g/cm³ | 2.66 g/cm³ | 2.66 g/cm³ |
Process and quality control
Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.