4343 O Aluminium Plate, Coil, Foil — GB/T 3880 · ASTM B209
4343 is the lower-silicon brazing clad, 6.8–8.2% Si, used where a thinner and more controllable clad layer is wanted than 4045 gives — typically automotive radiators, charge-air coolers and air-conditioning evaporators. It is roll-bonded onto a 3003 core and brazed in a controlled-atmosphere furnace.
Aluminium plate & sheetAluminium coilAluminium foil
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 4343 |
|---|---|
| Series | 4xxx |
| Temper | O |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 3198 |
| Thickness | 0.2 – 4.0 mm |
| Width | up to 2,650 mm |
| Length | coil ID 508 mm · 2 – 8 t |
| Surface | Mill finish · Coated · Slit to width |
| Density | 2.70 g/cm³ |
| Melting range | 577 – 615 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Si | 6.8 – 8.2 |
| Fe | 0.80 max |
| Cu | 0.25 max |
| Zn | 0.20 max |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 115 MPa |
| Yield strength Rp0.2 | 50 MPa |
| Elongation A | 20 % |
| Hardness | 33 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 4343 | 4045 | 1050 |
|---|---|---|---|
| Tensile strength Rm | 115 MPa | 120 MPa | 80 MPa |
| Yield strength Rp0.2 | 50 MPa | 55 MPa | 35 MPa |
| Elongation A | 20 % | 20 % | 35 % |
| Hardness | 33 HBW | 35 HBW | 25 HBW |
| Density | 2.70 g/cm³ | 2.70 g/cm³ | 2.71 g/cm³ |
Process and quality control
Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.