ZORLANGALUMINUM

7005 T6 Aluminium Plate, Bar, Tube, Profile — GB/T 3880 · ASTM B209

7005 is the weldable 7xxx: zinc and magnesium give 350 MPa tensile and 290 MPa yield in T6, about 13% above 6061, while zirconium keeps the heat-affected zone from softening. It natural-ages back toward full strength after welding, which is why it is the default for bicycle framesets.

Aluminium plate & sheetAluminium bar & rodAluminium tube & pipeAluminium profile

7005 — Bicycle frames
Application reference · 7005 T6 · 1 / 4

Main applications

Where this grade is used in series production, as listed in our alloy data sheet.

  • Bicycle frames
  • Rackets and ski poles
  • Welded load-bearing parts

Specifications

Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.

Alloy7005
Series7xxx
TemperT6
StandardGB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 6892
Thickness0.2 – 150 mm
Widthup to 2,650 mm
Lengthup to 12,000 mm
SurfaceMill finish · PVC coated · Anodised
Density2.78 g/cm³
Melting range600 – 650 °C

Other tempers on request

Melting range is the typical solidus–liquidus interval for the grade.

Chemical composition

Typical limits to ASTM / EN for the alloys we roll and extrude.

Element%
Zn4.0 – 5.0
Mg1.0 – 1.8
Mn0.20 – 0.70
Zr0.08 – 0.20
Alremainder

Mechanical properties

Typical values at room temperature for the temper shown.

PropertyValue
Tensile strength Rm350 MPa
Yield strength Rp0.2290 MPa
Elongation A12 %
Hardness105 HBW

How it compares

The two alloys buyers most often shortlist against this one.

Property700560616082
Tensile strength Rm350 MPa310 MPa310 MPa
Yield strength Rp0.2290 MPa275 MPa260 MPa
Elongation A12 %12 %10 %
Hardness105 HBW95 HBW95 HBW
Density2.78 g/cm³2.70 g/cm³2.70 g/cm³

Process and quality control

Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.

Packing

Export packing

Certification and reports

Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.

Download spec sheet (PDF)

PDF, 1 page, generated from the data on this page.

All grades