ZORLANGALUMINUM

5754 O Aluminium Plate, Tube, Coil — GB/T 3880 · ASTM B209

5754 is the automotive body alloy: in O it stretches 26% at only 200 MPa tensile, so deep door inners and floor panels form without splitting, and H111 keeps it stable in storage. It welds and anodises well and is the usual choice for chassis parts, tanks and welded structures that see road salt.

Aluminium plate & sheetAluminium tube & pipeAluminium coil

5754 — Automotive inner panels and chassis
Application reference · 5754 O · 1 / 4

Main applications

Where this grade is used in series production, as listed in our alloy data sheet.

  • Automotive inner panels and chassis
  • Storage tanks
  • Welded structures
  • Transport sheet

Specifications

Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.

Alloy5754
Series5xxx
TemperO · H111
StandardGB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 6892
Thickness0.2 – 150 mm
Widthup to 2,650 mm
Lengthup to 12,000 mm
SurfaceMill finish · PVC coated · Anodised
Density2.66 g/cm³
Melting range600 – 645 °C

Other tempers on request

Melting range is the typical solidus–liquidus interval for the grade.

Chemical composition

Typical limits to ASTM / EN for the alloys we roll and extrude.

Element%
Mg2.6 – 3.6
Mn0.50 max
Cr0.30 max
Alremainder

Mechanical properties

Typical values at room temperature for the temper shown.

PropertyValue
Tensile strength Rm200 MPa
Yield strength Rp0.285 MPa
Elongation A26 %
Hardness50 HBW

How it compares

The two alloys buyers most often shortlist against this one.

Property575451825083
Tensile strength Rm200 MPa400 MPa305 MPa
Yield strength Rp0.285 MPa365 MPa215 MPa
Elongation A26 %4 %16 %
Hardness50 HBW105 HBW70 HBW
Density2.66 g/cm³2.65 g/cm³2.66 g/cm³

Process and quality control

Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.

Packing

Export packing

Certification and reports

Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.

Download spec sheet (PDF)

PDF, 1 page, generated from the data on this page.

All grades