ZORLANGALUMINUM

6101 T6 Aluminium Tube, Profile — GB/T 6892 · ASTM B221

6101 balances conductivity against strength: about 55% IACS with 200 MPa tensile in T6, so a busbar carries the current of twice the copper section at a third of the weight. Standard for busbar trunking, switchgear busbars and EV charging conductors. Extruded tube and profile, cut and drilled to length.

Aluminium tube & pipeAluminium profile

6101 — Busbar trunking
Application reference · 6101 T6 · 1 / 3

Main applications

Where this grade is used in series production, as listed in our alloy data sheet.

  • Busbar trunking
  • Switchgear busbars
  • EV charging conductors
  • Substation connectors

Specifications

Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.

Alloy6101
Series6xxx
TemperT6
StandardGB/T 3190 / GB/T 6892 / ASTM B221 / EN 755-2
Thickness0.8 – 20 mm wall
Widthup to 400 mm section
Lengthup to 12,000 mm
SurfaceMill finish · Anodised · Powder coated
Density2.70 g/cm³
Melting range600 – 655 °C

Other tempers on request

Melting range is the typical solidus–liquidus interval for the grade.

Chemical composition

Typical limits to ASTM / EN for the alloys we roll and extrude.

Element%
Mg0.35 – 0.80
Si0.30 – 0.70
Fe0.50 max
Alremainder

Mechanical properties

Typical values at room temperature for the temper shown.

PropertyValue
Tensile strength Rm200 MPa
Yield strength Rp0.2170 MPa
Elongation A12 %
Hardness60 HBW

How it compares

The two alloys buyers most often shortlist against this one.

Property610110506061
Tensile strength Rm200 MPa80 MPa310 MPa
Yield strength Rp0.2170 MPa35 MPa275 MPa
Elongation A12 %35 %12 %
Hardness60 HBW25 HBW95 HBW
Density2.70 g/cm³2.71 g/cm³2.70 g/cm³

Process and quality control

Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.

Packing

Export packing

Certification and reports

Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.

Download spec sheet (PDF)

PDF, 1 page, generated from the data on this page.

All grades