8011 H18 Aluminium Plate, Coil, Foil — GB/T 3880 · ASTM B209
8011 is the packaging foil: silicon and iron around 0.5–1.0% give H18 foil 150 MPa tensile with the stiffness a bottle cap needs to crimp and hold, and the low heavy-metal content that pharma blister foil requires. Rolled 0.006–0.20 mm, bright or lubricated.
Aluminium plate & sheetAluminium coilAluminium foil
Specifications
Values per mill test certificate; tolerances to the standard named on this page unless agreed otherwise.
| Alloy | 8011 |
|---|---|
| Series | 8xxx |
| Temper | H18 |
| Standard | GB/T 3190 / GB/T 3880 / ASTM B209 / EN 485-2 / GB/T 3198 |
| Thickness | 0.006 – 0.20 mm |
| Width | up to 1,800 mm |
| Length | coil ID 76 / 152 mm · up to 5 t |
| Surface | Mill finish · Bright · Lubricated |
| Density | 2.71 g/cm³ |
| Melting range | 620 – 660 °C |
Other tempers on request
Melting range is the typical solidus–liquidus interval for the grade.
Chemical composition
Typical limits to ASTM / EN for the alloys we roll and extrude.
| Element | % |
|---|---|
| Si | 0.50 – 0.90 |
| Fe | 0.60 – 1.00 |
| Mn | 0.20 max |
| Cu | 0.10 max |
| Al | remainder |
Mechanical properties
Typical values at room temperature for the temper shown.
| Property | Value |
|---|---|
| Tensile strength Rm | 150 MPa |
| Yield strength Rp0.2 | 140 MPa |
| Elongation A | 4 % |
| Hardness | 50 HBW |
How it compares
The two alloys buyers most often shortlist against this one.
| Property | 8011 | 1050 | 3003 |
|---|---|---|---|
| Tensile strength Rm | 150 MPa | 80 MPa | 150 MPa |
| Yield strength Rp0.2 | 140 MPa | 35 MPa | 145 MPa |
| Elongation A | 4 % | 35 % | 8 % |
| Hardness | 50 HBW | 25 HBW | 40 HBW |
| Density | 2.71 g/cm³ | 2.71 g/cm³ | 2.73 g/cm³ |
Process and quality control
Typical properties are verified heat by heat: spectrometric composition on every melt, tensile and yield on every cast, hardness and dimensional checks before packing. A mill test certificate, dimensional report and third-party inspection (SGS or BV) are issued against the heat number.
Packing
Certification and reports
Mill test certificate per heat, dimensional inspection report, and SGS or BV third-party inspection on request. Certificates travel with the shipping documents.
PDF, 1 page, generated from the data on this page.